Pattern Imprinted Concrete Sealer - High Solid Gloss (25Ltr)

Multicrete Imprinted Concrete Sealer is a high quality acrylic solvent based clear sealer, designed to protect Imprinted Concrete areas by repelling water, dirt, oil and fuels.

Please note all non-palletised orders of this product will be dispatched under limited quantity transport regulations in 5 litre containers

• Ready for use no dilution required
• Surface dry in 1-2 hours
• High Solids
• Enhances imprinted concrete drives and patios

• 2-4 square metres per litre depending on the substrate, porosity of surface and application method. Some porous or neglected surfaces may require more than a single coat.

• For new surfaces - leave up to 7 days after new concrete is laid. Ensure the surface is clean
• For old surfaces - fully clean off with power wash. Allow to thoroughly dry prior to application
• Can be applied by course droplet low level, chemical resistant sprayer, soft bristle brush or roller
• Avoid excess pooling and over coating

• Do not apply when ground temperatures are below 5 degrees
• Do not apply to damp or wet surfaces
• Do not apply when rain is imminent or if efflorescence is present
• Do not walk on treated area till dry
• Do not park vehicles on treated surface for 24-48 hrs
• Do not use on clay surfaces
• Inclusion of additives such as colour tints, pigments and anti-slip agents may affect final finish