HomePattern Imprinted ConcreteConcrete & Paving Sealants

Pattern Imprinted Concrete Sealer - Ultra High Solid Gloss Sealant (5Ltr)
Pattern Imprinted Concrete Sealer - Ultra High Solid Gloss Sealant (5Ltr)
Pattern Imprinted Concrete Sealer - Ultra High Solid Gloss Sealant (5Ltr)
Pattern Imprinted Concrete Sealer - Ultra High Solid Gloss Sealant (5Ltr)
Pattern Imprinted Concrete Sealer - Ultra High Solid Gloss Sealant (5Ltr)

Pattern Imprinted Concrete Sealer - Ultra High Solid Gloss Sealant (5Ltr)

£21.19
£17.66 (ex. VAT)
Multicrete Imprinted Concrete Sealers are a high quality acrylic solvent based clear sealer, designed to protect Imprinted Concrete areas by repelling water, dirt, oil and fuels.

Product information

Multicrete Imprinted Concrete Sealer is a high quality acrylic solvent based clear sealer, designed to protect Imprinted Concrete areas by repelling water, dirt, oil and fuels.


Benefits
  • Ready for use no dilution required
  • Surface dry in 1-2 hours
  • High Solids
  • Enhances imprinted concrete drives and patios
Coverage
  • 2-4 square metres per litre depending on the substrate, porosity of surface and application method. Some porous or neglected surfaces may require more than a single coat.
Application
  • For new surfaces - leave up to 7 days after new concrete is laid. Ensure the surface is clean
  • For old surfaces - fully clean off with power wash. Allow to thoroughly dry prior to application
  • Can be applied by course droplet low level, chemical resistant sprayer, soft bristle brush or roller
  • Avoid excess pooling and over coating
Limitations
  • Do not apply when ground temperatures are below 5 degrees
  • Do not apply to damp or wet surfaces
  • Do not apply when rain is imminent or if efflorescence is present
  • Do not walk on treated area till dry
  • Do not park vehicles on treated surface for 24-48 hrs
  • Do not use on clay surfaces
  • Inclusion of additives such as colour tints, pigments and anti-slip agents may affect final finish
Weight: 5kg