Multicrete Universal Concrete Sealer is a high quality acrylic solvent based clear sealer, designed to protect concrete by repelling water, dirt, oil and fuel, whilst enhancing the concrete based area.
- Ready for use no dilution required
- Surface dry in 1-2 hours
- High Solids
- Enhances concrete drives and patios.
- For new surfaces – leave up to 7 days after new concrete is laid. Ensure the surface is clean.
- For old surfaces – fully clean off with power wash. Allow to thoroughly dry prior to application.
- Can be applied by course droplet low level, chemical resistant sprayer, soft bristled brush or roller.
- Avoid excess pooling and over coating.
- 2-4 square metres per litre depending on the substrate, porosity of surface and application method. Some porous surfaces may require more than a single coat.
- Do not apply when ground temperatures are below 5oc
- Do not apply to damp or wet surfaces
- Do not apply when rain is imminent or if efflorescence is present
- Do not walk on treated area till dry
- Do not park vehicles on treated surface for 24-48hrs
- Do not use on clay surfaces
- Inclusion of additives such as colour tints, pigments and anti-slip agents may affect final finish